Members | Sign In
Old CGS Forum > Upgrades & Parts
avatar

Wiring neck selector switch for EDS-1275 double neck

posted Oct 26, 2013 16:16:31 by MichaelWamback
I've had a few people asking about how to wire the Switchcraft DP/DT switch to select the necks on the EDS-1275 Gibson double neck.

If you are using Switchcraft, the part number is 12015x, and looks like this:



As you can see, there's a lot more going on with this than the standard 3-way switch.

When you wire it up, it will be necessary to solder a couple of jumper wires across the bottom. One side of the switch will be for the 12-string neck, and the other side the 6-String neck. The middle lug is ground. As they say, a picture is worth a thousand words:


The two most important things to remember in life: "The only time it's acceptable to work with amateurs is if you are making porn." "If you want to work with clowns, join a circus."
Login below to reply: